Showing posts with label Space Marines. Show all posts
Showing posts with label Space Marines. Show all posts

Sunday, June 29, 2014

Wash Me!

Just an update from the week, and a sneak peek into the next few things.  

A few days ago I was able to put the finishing touches on my Rhino, which you know if you've been following the facebook page.  However, below I'll go into some detail on how I painted some of the parts.  








For the white and blue parts, I used the same technique as I did on the Tactical squad I painted, just on a larger scale (read those details here).  As some have pointed out, I didn't really mask off any areas and so there is a little bit of overspray (darn).  The vehicles I do in the future will be a little neater - to be honest, I thought I was going to screw it up and have to start over.  Either way, just as I mentioned with the tac squad, I think I want to brighten up the blue a little, so I'm going to try a little change in the next batch.  Hopefully it offers an improvement without changing it drastically.  

Weathering the model was pretty much the same as well.  I used Dryad Bark for the chipping on the white armor and ended up using P3 Rucksack tan for the tiny smidge of chipping on the blue parts.  Some have also suggested that more bare metal is needed to make the model look better... I might try some of that on the next model as well, but really don't think that it needs it.  I was trying to avoid metallics or just have a small bit of it on these models.  

Speaking of the metallics, the exhausts were pretty easy on this, I kept them in subassemblies and painted the metal parts with Vallejo metallic silver.  I had never used the Vallejo liquid metallics before now and found them a little tricky to use for the first go-around.  Apparently they dry very quickly - and to be honest, seem a little bit harsh on the brush.  This paint did produce a very nice shiny silver though; much more vibrant than the acrylic metallics I've used from any other range.  After the base coat, I washed them with two coats of agrax earthshade and then used the airbrush to "burn" the tips, with Vallejo Air Medium Camo Brown and Black. 

The tracks were glued to the tank after most of the painting was complete and then airbrushed in two coats of vallejo air paint.  The first was mud brown and the second was medium camo brown.  I made sure to overspray onto the sides of the tank to make it seem dirtier near the tracks and ground.  

The bolters... very simple.  Basecoated black > drybrush with leadbelcher > heavy wash of nuln oil.  Voila.  

Last touches included spraying some black paint over the side vents and doing the headlights, which was vallejo gold yellow > vallejo yellow > white.  

Not bad to paint and I was surprised at how quick this was.  It probably took less than 10 hours to paint to completion and I think it produced a very high quality for something I plan to use on the tabletop.  Good news also - the transfers actually cooperated.  

And now, with the first two pieces of the World Eaters complete, there is no time to waste!  I have quickly washed the next project, a rinse and repeat of 10 tactical marines and another rhino.  These will vary slightly as the marines do not have magnetized weapons, so I added some chainsaw bayonets to their bolters.  The Rhino will have a crewman sticking out of the top as well.  As you can see from the picture below, assembly is complete and now all to do is mount the marines on cork and start sprayin!



In other news... I'm very excited to see that Coolminiornot has launched the Zombicide Season 3 Kickstarter.  One of my favorite games that I never have time to play (or paint) will be a must for me to go all in.  I missed the early bird, but went ahead and pledged at the full level.  Check it out yourself by going here.


Thats it... Gonna probably be a slow couple of days as I will be working late and writing papers for school, but there stands to be a lot of opportunity for hobby progress going into the holiday weekend!  My goal is to get these models primed so I can paint on my days off.  Until then, please continue to follow small updates on facebook and Happy Painting!

Monday, June 23, 2014

Eaters of Worlds

Very happy with and proud to show off the first completed piece(s) of my World eaters project.  As would make sense, I have chosen to start with a Tactical Squad.  

I have magnetized each of these 10 models to allow them to have versatility in weapons choices, and I will have a small step-by-step sometime in the future to show how this was done (easy!), but for this post, I will focus on the painting steps for this unit.  

Can't say enough how pleased I am with these Forge World models.  I've had some in the past that are difficult to paint or have really rough surfaces, but these pre-heresy marines are fun to paint and come together nicely in the end.  Some of these pics are probably duplicates from previous project updates, so I apologize in advance.  Either way, please feel free to offer comments or feedback or to send me a message asking questions.  Big shout out to Maybug Games for providing inspiration and some color choices for these models, although I did veer slightly from his scheme.  

In order to do this properly, some planning and prep work was required.  In order to avoid a huge headache with the airbrush, it was necessary to paint these models in sub-assemblies.  I mounted the heads, shoulder pads, backpacks, and weapons separately.  


 As you can see from the pictures, I used cork (as I normally do) to mount the bodies and heads for spraying, but had to get a little creative with the other pieces.  In order to achieve the correct lighting on the shoulder pads, I placed them on the model to see their angle and then stuck them to a strip of masking tape at the same angle (I numbered each marine from 1-10 corresponding from top to bottom on the tape).  This will ensure the highlights point up to the sky rather than just sitting at the top of each shoulder pad.  

I then mounted the backpacks and weapons to the tips of popsicle sticks using a small amount of blue tac.  This made sure I wouldn't have too much area on each of these pieces uncovered by paint, but also that I would have full control and ease of movement so that I could pick out highlights and other details.  

I primed the bodies and heads of the models white, since their primary color would be white and the backpacks, bolters, and shoulder pads were primed black since they were going to be blue (I may change this in the future since the blue didn't really turn out as bright as I had hoped).  After priming those pieces black I put some zenithal highlights on them with white primer so that the first layer of paint would have a natural highlight.  The masking tape strip makes this incredibly easy for the shoulder pads, because arranging them based on their final position on the model meant that I could just hold the tape and use the airbrush to hit the top of the shoulder pads with a dab of white.  


Using the airbrush, I used two "recipes" for the white and blue parts.  For the white, I started by shading down, first using a 1:1 mix of Vallejo Air White and Vallejo Model Color (VMC) Flat Earth. I sprayed this mix on the models in the shadows underneath the models and also in areas near joints and around trim.  Then, as a deep shadow, pure VMC flat earth was sprayed into the deepest areas.  When you put this on the model, it doesn't look too impressive, but you have to be patient - it will all come together in the end.  

For the blue, I used Vallejo Air Intermediate Blue first as a basecoat.  Then, I put a spot of white on the areas where the highlight would be and went over with a light coat of Vallejo Air Insignia blue.  In hindsight, an additional highlight was probably needed, maybe even with pure white, but I will try this again in the future - I was happy with the outcome.  

At this point, it was time for a bit of weathering, so very simply I used Dryad Bark and randomly applied this with a piece of blister foam before assembling the models for the last few steps.  

For Brass parts, Sycorax Bronze was used to base coat these areas, which were mostly around the trim of the armored parts, including the shoulder pads, arm/leg, and knee pads.

Final shading was done using an oil wash.  Raw umber oil paint was mixed with mineral spirits in a small cup and then applied very carefully to recesses and cracks in the armor, allowing coverage by capillary action.  It was necessary at times to remix the oil wash so that it flowed better, as it tends to settle at times.  Unlike most washes, I did not touch some of the large flat surfaces and instead decided to stay in the deepest recesses and around rivets, etc.  This allowed the armor to look stained and more realistically weathered.  

The final bits included painting details on the backpack and bolters silver and doing normal washes with nuln oil.  






For the bases, I used Secret Weapon Miniatures mud base kit and the tutorial for the kit found here.  It was easy enough, but I'm going to try to find a video, because it seemed like a little more water was needed than I had interpreted from the tutorial.  I feel like the color of these bases work well with the color scheme, tying in with the dusty white and the blue.  





And the completed models....




Again, happy with the turnout, but it was not without lessons learned.  Fortunately, I have plenty of models left to paint in the force (and unfortuantely many more to purchase).  Next up, I've spent some time tonight priming the first squad's ride, a deimos pattern rhino.  This will provide a nice challenge and learning opportunity to see how I will need to paint my tanks, which will be markedly different from the infantry.  


Additionally, I have the next tactical squad and Rhino taking a bath.  


Thanks for reading.  Hopefully, I'll have more updates soon - I plan on having another painting marathon during the upcoming weekend, which made the updates this week possible.  Until then, Happy Painting!



Wednesday, May 7, 2014

The World Eaters have arrived


Very excited that my Horus Heresy army arrived from Forgeworld.  This should keep me busy for a while (as if I didn't have enough miniatures to keep me painting for years on end).  I talked about this a little bit after Adepticon, but I'm very much looking forward to playing Horus Heresy as well as putting paint to these beautiful models.  I cannot tell you how detailed they are and how happy I am with the quality.  

Years ago in 40k, I played Chaos Space Marines, primarily Khorne, until the rules took a large dump on the Blood God.  I've waited and waited to play them again, salivating over some of the Forge World models and upgrades for World Eaters Chaos Space Marines.  However, when trying to decide on which Legion to play in Horus Heresy, this experience made that easy for me.  I was hesitant to paint a white army, but I think I can make it work and have found some examples from others to get ideas from.  

Stay tuned for updates.  I'll leave you with pictures of my loot and the start of my Resin baths - I went ahead and started soaking 10 Tactical Marines, my weapon packs, and a Rhino.  I figure these will give me good practice for the color scheme before I break out the fun stuff.  Thanks for reading and happy painting!


Look at the majesty!


A pool of resin!


Bath time!